ELEMENTS		PERFORMANCE CRITERIA
Elements describe the essential outcomes.		Performance criteria describe the performance needed to demonstrate achievement of the element.
1	Plan for the project management of substation augmentation and maintenance	1.1	Work health and safety (WHS)/occupational health and safety (OHS) practices/procedures and environmental and sustainable energy procedures, which may influence the undertaking of project management of substation augmentation and maintenance, are reviewed and determined
		1.2	Purpose of the undertaking of project management of substation augmentation and maintenance is established after data is analysed and expected outcomes of the work are confirmed with appropriate personnel
		1.3	Organisational established procedures on policies and specifications for the undertaking of project management of substation augmentation and maintenance are obtained or established with appropriate personnel
		1.4	Testing procedures are discussed with/directed to appropriate personnel in order to ascertain the project brief
		1.5	Testing parameters are established from organisational established procedures and policies and specifications https://www.pdfdrive.com/manual-of-test-procedures-for-materials-d19693651.html http://www.iqytechnicalcollege.com/Manual of Test Procedures for Materials ( PDFDrive ).pdf
		1.6	Equipment/tools and personal protective equipment (PPE) are selected based on specified performance criteria and established procedures
		1.7	Work roles and tasks are allocated according to requirements and individual competencies
		1.8	Work is prioritised and sequenced for the most efficient/effective outcome, completed within an acceptable timeframe, to a quality standard and in accordance with established procedures
		1.9	Liaison and communication issues with others/authorised personnel, authorities, clients and landowners are resolved and activities coordinated to carry out work
		1.10	Risk control measures are identified, prioritised and evaluated against the work schedule
		1.11	Relevant work permits are secured to coordinate the performance of work according to requirements and/or established procedures
2	Carry out project management of substation augmentation and maintenance	2.1	Circuit/systems modelling is used to evaluate alternative proposals in accordance with established procedures
		2.2	WHS/OHS and sustainable energy principles, functionality and practices to reduce the incidents of accidents and minimise waste are incorporated into the project in accordance with requirements and/or established procedures
		2.3	Undertaking of project management of substation augmentation and maintenance decisions are made on the basis of safety and effective outcomes according to requirements and/or established procedures
		2.4	Mathematical/engineering models of the undertaking of project management of substation augmentation and maintenance are used to analyse the effectiveness of the finished project in accordance with requirements and established procedures
		2.5	Technical advice is given regarding potential hazards, safety risks and control measures so that monitoring and preventative action can be undertaken and/or appropriate authorities consulted, where necessary, in accordance with requirements and established procedures
		2.6	Essential knowledge and associated skills are applied to analyse specific data and compare it with compliance specifications to ensure completion of the project within an agreed timeframe according to requirements
		2.7	Testing of substation augmentation and maintenance is undertaken according to requirements and established procedures
		2.8	Work teams/groups are arranged/coordinated/evaluated to ensure planned goals are met according to established procedures
		2.9	Solutions to non-routine problems are identified and actioned, using acquired essential knowledge and associated skills, according to requirements
		2.10	Quality of work is monitored against personal performance agreement and/or established organisational and professional standards
		2.11	Strategic plans are developed incorporating organisation initiatives in accordance with established procedures
3	Complete the project management of substation augmentation and maintenance	3.1	Final inspections of substation augmentation and maintenance are undertaken to ensure they comply with all requirements and include all specifications and documentations needed to complete the project
		3.2	Appropriate personnel are notified of completion and reports and/or completion documents are finalised/commissioned
		3.3	Reports and/or completion documents are submitted to relevant personnel/organisations for approval and, where applicable, statutory or regulatory approval
		3.4	Approved copies of the project management of substation augmentation and maintenance documents are issued and records are updated in accordance with established procedures

UETDRTS015 Maintain complex network protection and control systems (180)

IS68+74+I006

IS68+74

Power System Protection

IS68+74

AE.zip

www.highlightcomputer.com/G015-AE Mod.zip

http://www.filefactory.com/file/c0b7ff7/n/AE.zip

G015(AE)Lesson 1-Power system protection scheme.zip

http://youtu.be/ihpd3cDAhBU

http://youtu.be/EGXkLRM2L9M

http://youtu.be/zOIUYQ7OJfs

G015(AE)Lesson 2-Differential relay.zip

http://youtu.be/2iW0oEScMsw

G015(AE)Lesson_3-Over_current_&_earth_fault_protection.zip

http://youtu.be/hvGjdO9jEhk

G015(AE)Lesson 4-Three phase differential relay.zip

http://youtu.be/2iW0oEScMsw

http://youtu.be/VuzjXkRx4UI

http://youtu.be/2iW0oEScMsw

G015(AE)Lesson 5-Current time grading.zip

http://youtu.be/r0qkLrmkKsM

G015AE Lesson 6

http://youtu.be/InsTLh7_N5k

G015(AE)Lesson_7-CT_PT.zip

http://youtu.be/ZF_y65xsM_M

G015(AE)Lesson 8-Distance relay.zip

http://youtu.be/NKzMVquFLu8

G015(AE)Lesson 9-Telecom in power protection.zip

http://youtu.be/9C6ogqZAKRg

http://youtu.be/XRpffA6hU_U

http://youtu.be/X-kz3cyL9fU

UETDRTS010 Develop power systems secondary isolation instructional documents

https://www.pdfdrive.com/practical-power-systems-protection-d34359587.html

http://www.iqytechnicalcollege.com/Practical Power Systems Protection ( PDFDrive ).pdf

https://web.horizonpower.com.au/media/2640/switching-process-and-rulesdoc.pdf

http://www.iqytechnicalcollege.com/switching-process-and-rulesdoc (1).pdf

UETDRTS017 Maintain interdependent network protection and control systems

https://ietresearch.onlinelibrary.wiley.com/doi/full/10.1049/gtd2.12177

http://www.iqytechnicalcollege.com/Asset management and maintenance programming for power distribution systems.pdf

https://www.pdfdrive.com/protection-of-electrical-networks-d33483131.html

www.iqytechnicalcollege.com/

https://www.pdfdrive.com/electric-power-system-planning-d39893329.html

http://www.iqytechnicalcollege.com/Protection of Electrical Networks ( PDFDrive ).pdf

Elements and Performance Criteria

ELEMENTS		PERFORMANCE CRITERIA
Elements describe the essential outcomes.		Performance criteria describe the performance needed to demonstrate achievement of the element.
1	Plan for the maintenance of network protection and control systems (complex)	1.1	Work health and safety (WHS)/occupational health and safety (OHS) practices/procedures and environmental and sustainable energy procedures, which may influence the maintenance of network protection and control systems (complex), are reviewed and determined
		1.2	Purpose of the maintenance of network protection and control systems (complex) is established after data is analysed and expected outcomes of the work are confirmed with appropriate personnel
		1.3	Organisational established procedures on policies and specifications for the maintenance of network protection and control systems (complex) are obtained or established with appropriate personnel
		1.4	Testing procedures are discussed with and/or directed to appropriate personnel in order to ascertain the project brief
		1.5	Testing parameters are ascertained from organisational established procedures, policies and specifications
		1.6	Equipment/tools and personal protective equipment (PPE) are selected based on specified performance criteria and established procedures
		1.7	Work roles and tasks are allocated according to requirements and individual competencies
		1.8	Work is prioritised and sequenced for the most efficient/effective outcome, completed within an acceptable timeframe, to a quality standard and in accordance with established procedures
		1.9	Liaison and communication issues with others/authorised personnel, authorities, clients and landowners are resolved and activities coordinated to carry out work
		1.10	Risk control measures are identified, prioritised and evaluated against the work schedule
		1.11	Relevant work permits are secured to coordinate the performance of work according to requirements and/or established procedures
2	Carry out the maintenance of network protection and control systems (complex)	2.1	Circuit/systems modelling is used to evaluate alternative proposals in accordance with established procedures
		2.2	WHS/OHS and sustainable energy principles, functionality and practices to reduce the incidents of accidents and minimise waste are incorporated into the project in accordance with requirements and/or established procedures
		2.3	Maintenance of network protection and control systems (complex) decisions are made on the basis of safety and effective outcomes according to requirements and/or established procedures
		2.4	Mathematical and/or engineering models of the scheme are used to analyse the effectiveness of the finished project in accordance with requirements and established procedures
		2.5	Technical advice is given regarding potential hazards, safety risks and control measures so that monitoring and preventative action can be undertaken and/or appropriate authorities consulted, where necessary, in accordance with requirements and established procedures
		2.6	Essential knowledge and associated skills are applied to analyse specific data and compare it with compliance specifications to ensure completion of the project within an agreed timeframe according to requirements
		2.7	Testing of network protection and control systems (complex) is undertaken according to requirements and established procedures
		2.8	Work teams/groups are arranged/coordinated/evaluated to ensure planned goals are met according to established procedures
		2.9	Solutions to non-routine problems are identified and actioned, using acquired essential knowledge and associated skills, according to requirements
		2.10	Quality of work is monitored against personal performance agreement and/or established organisational and professional standards
		2.11	Strategic plans are developed incorporating organisation initiatives in accordance with established procedures
3	Complete the maintenance of network protection and control systems (complex)	3.1	Final inspections of the network protection and control systems (complex) are undertaken to ensure they comply with all requirements and include all specifications and documentation needed to complete the project
		3.2	Appropriate personnel are notified of completion and reports and/or completion documents are finalised/commissioned
		3.3	Reports and/or completion documents are submitted to relevant personnel/organisations for approval and, where applicable, statutory or regulatory approval
		3.4	Approved copies of the maintenance of network protection and control systems (complex) documents are issued and records are updated in accordance with established procedures

UETDRTS006 Conduct evaluation of power system substation faults (140)

7762AB

E125	Electrical Circuits

Electrical Circuits 1

Electrical Circuits 2

G149

Three Phase Power Circuits

3 Phase Circuits

E125+G149

Circuit G048+E025.zip

Circuit G048+E025

www.highlightcomputer.com/Circuit G048E025G049-Mod.zip

UETDRSO009 Manage power systems transmission networks (180)

IS69

AG.zip

www.highlightcomputer.com/G015-AG Mod.zip

7761M

https://www.pdfdrive.com/protection-substation-automation-power-quality-and-siemens-e15229427.html

http://www.iqytechnicalcollege.com/Protection, Substation Automation Power Quality and - Siemens ( PDFDrive ).pdf

https://www.pdfdrive.com/short-circuits-in-power-systems-a-practical-guide-to-iec-60909-d158147935.html

http://www.iqytechnicalcollege.com/Short Circuits in Power Systems_ A Practical Guide to IEC 60909 ( PDFDrive ).pdf

https://www.pdfdrive.com/line-loss-analysis-and-calculation-of-electric-power-systems-d188391225.html

http://www.iqytechnicalcollege.com/Line loss analysis and calculation of electric power systems ( PDFDrive ).pdf

https://www.pdfdrive.com/power-system-analysis-power-system-analysis-2nd-ed-d176072996.html

http://www.iqytechnicalcollege.com/Power System Analysis Power System Analysis.pdf

https://www.pdfdrive.com/handbook-of-electric-power-calculations-podeliseru-e6136753.html

http://www.iqytechnicalcollege.com/HANDBOOK OF ELECTRIC POWER CALCULATIONS - Podelise.ru ( PDFDrive ).pdf

Elements and Performance Criteria

ELEMENTS		PERFORMANCE CRITERIA
Elements describe the essential outcomes.		Performance criteria describe the performance needed to demonstrate achievement of the element.
1	Plan for the evaluation of power system events	1.1	Work health and safety (WHS)/occupational health and safety (OHS) practices/procedures and environmental and sustainable energy procedures, which may influence the evaluation of power system failures, are reviewed and determined
		1.2	Purpose of the evaluation of power system events are established after data is analysed and expected outcomes of the work are confirmed with appropriate personnel
		1.3	Organisational established procedures on policies and specifications for the evaluation of power system failures are obtained or established with appropriate personnel
		1.4	Testing procedures are discussed with/directed to appropriate personnel in order to ascertain the project brief
		1.5	Testing parameters are established from organisational established procedures on policies and specifications
		1.6	Equipment/tools and personal protective equipment (PPE) are selected based on specified performance criteria and established procedures
		1.7	Work roles and tasks are allocated according to requirements and individual competencies
		1.8	Work is prioritised and sequenced for the most efficient/effective outcome, completed within an acceptable timeframe, to a quality standard and in accordance with established procedures
		1.9	Liaison and communication issues with others/authorised personnel, authorities, clients and landowners are resolved and activities coordinated to carry out work
		1.10	Risk control measures are identified, prioritised and evaluated against the work schedule
		1.11	Relevant work permits are secured to coordinate the performance of work according to requirements and/or established procedures
2	Carry out the evaluation of power system events	2.1	Circuit/systems modelling is used to evaluate alternative proposals in accordance with established procedures
		2.2	WHS/OHS and sustainable energy principles, functionality and practices to reduce the incidents of accidents and minimise waste are incorporated into the project in accordance with requirements and/or established procedures
		2.3	Following evaluation of power system events, decisions are made on the basis of safety and effective outcomes according to requirements and/or established procedures
		2.4	Mathematical and /or engineering models of the evaluation of power system events are used to analyse the effectiveness of the finished project in accordance with requirements and established procedures
		2.5	Technical advice is given regarding potential hazards, safety risks and control measures so that monitoring and preventative action can be undertaken and/or appropriate authorities consulted, where necessary, in accordance with requirements and established procedures
		2.6	Essential knowledge and associated skills are applied to analyse specific data and compare it with compliance specifications to ensure completion of the project within an agreed timeframe according to requirements
		2.7	Testing of power system is undertaken according to requirements and established procedures
		2.8	Work teams/groups are arranged/coordinated/evaluated to ensure planned goals are met according to established procedures
		2.9	Solutions to non-routine problems are identified and actioned, using acquired essential knowledge and associated skills, according to requirements
		2.10	Quality of work is monitored against personal performance agreement and/or established organisational and professional standards
		2.11	Strategic plans are developed incorporating organisation initiatives in accordance with established procedures
3	Complete the evaluation of power system events	3.1	Final evaluation of all relevant data pertaining to the power system event is undertaken to ensure the recommendations comply with all requirements and include all specifications and documentations needed to complete the project
		3.2	Appropriate personnel are notified of completion and reports and/or completion documents are finalised/commissioned
		3.3	Reports and/or completion documents are submitted to relevant personnel/organisations for approval and, where applicable, statutory or regulatory approval
		3.4	Approved copies of the evaluation of power system event documents are issued and records are updated in accordance with established procedures

UETDRSO007 Manage high voltage distribution and sub-transmission network demand (180)

(7762AA)

IS67+69

Power System 1-G015+G046+A010

AA.zip

www.highlightcomputer.com/G015-AA Mod.zip

IS67	Electrical Energy Supply System

Electrical Distribution Lessons

IS67+69

Power System 1-G015+G046+A010

AA.zip

www.highlightcomputer.com/G015-AA Mod.zip

G015/ IS67+68+ IS74

Page 196 to 231 of

www.highlightcomputer.com/Video Lessons.pdf

Power System (1)

G015(AA)Lesson 1-Distribution system.zip

http://youtu.be/VuzjXkRx4UI

G015(AA)Lesson 2-Demand factor.zip

http://youtu.be/cUGbxhBT-Dc

http://youtu.be/DCCl4cO3Vu8

G015(AA)Lesson 3-Sag.zip

http://youtu.be/1s496h-Iuu8

G015(AA)Lesson 4-OH Line mechanical design.zip

http://youtu.be/T0BnyqV9T6E

http://youtu.be/hu1TrUv2_OY

G015(AA)Lesson 5-UG Cable.zip

http://youtu.be/hHCLzMnVmT0

http://youtu.be/A5AieaBBZHo

G015(AA)Lesson 6-Voltage control.zip

http://youtu.be/y1vTM5fvfyU

http://youtu.be/Z9HBGsVgymA

Assessment Requirements for UETDRSO007 Manage high voltage distribution and sub-transmission network demand

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least two separate occasions and include:

· applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including the use of risk control measures

· applying sustainable energy principles and practices

· demonstrating at least three (3) system manipulations that encompass the following:

· high voltage (HV) sub-transmission distribution network

· transmission network manipulation to control loading on equipment

· transformers with HV windings

· HV busbars

· HV isolators

· HV switchgear (applicable to enterprise equipment)

https://www.pdfdrive.com/extra-high-voltage-ac-transmission-engineering-e158721900.html

http://www.iqytechnicalcollege.com/Extra High Voltage A.C. Transmission Engineering ( PDFDrive ).pdf

· managing multiple switching instructions

· https://web.horizonpower.com.au/media/2639/switching-operators-manual-distribution.pdf

www.iqytechnicalcollege.com/

· coordinating the status of access permits/authorities on HV network equipment

· https://www.transgrid.com.au/media/dpdkojzo/access-for-work-on-high-voltage-substation-apparatus.pdf

www.iqytechnicalcollege.com/switching-operators-manual-distribution.pdf

· ensuring network plant operates within design and regulatory requirements on a real time basis

· https://www.safeworkaustralia.gov.au/system/files/documents/1703/guide-safe-design-plant.pdf

www.iqytechnicalcollege.com/guide-safe-design-plant.pdf

https://www.pdfdrive.com/electricity-distribution-intelligent-solutions-for-electricity-transmission-and-distribution-networks-e158168123.html

http://www.iqytechnicalcollege.com/Electricity Distribution_ Intelligent Solutions for Electricity Transmission and Distribution Networks ( PDFDrive ).pdf

· calculating line loading

· https://www.pdfdrive.com/line-loss-analysis-and-calculation-of-electric-power-systems-d188391225.html

http://www.iqytechnicalcollege.com/Line loss analysis and calculation of electric power systems ( PDFDrive ).pdf

· preparing and authorising HV distribution switching programs

· https://www.sa.gov.au/__data/assets/pdf_file/0011/398504/20190313-Switching-Manual-TR-V5_1.pdf

www.iqytechnicalcollege.com/20190313-Switching-Manual-TR-V5_1.pdf

· demonstrating application of supervisory control and data acquisition (SCADA) or equivalent

· analysing, diagnosing and reporting system failures

· https://www.pdfdrive.com/plc-scada-based-substation-automation-d39204616.html

http://www.iqytechnicalcollege.com/plc & scada based substation automation ( PDFDrive ).pdf

· calculating and analysing paralleling conditions on the interconnected HV system as applicable to the entity

· https://www.tasnetworks.com.au/config/getattachment/547ef2d8-64e2-4668-a12e-59e76fe33618/distribution-network-operation-manual.pdf

www.iqytechnicalcollege.com/Distribution-Network-Operation-Manual.pdf

· preparing, writing and checking switching sheets to undertake all of the following:

· managing load

· managing voltage

· minimising loss

· maximising system reliability

· allowing safe network access for maintenance activities

· allowing safe network access for construction activities

· validating fault reports arising from system disturbances

· dealing with unplanned events on at least one (1) occasion,

https://web.horizonpower.com.au/media/2639/switching-operators-manual-distribution.pdf

www.iqytechnicalcollege.com/switching-operators-manual-distribution.pdf

Study Package (1)-OHS

Study Package (2)-Power System Planning

Study Package (3)-Testing

3-ESI Study Package 3 (5,15)

Study Package (4) Power Transformer

6-ESI Study Package 7 (4,8,11,13)

4-ESI Study Package 4 (7) + 11 (21)

Study Package (5) Machine Installation

3-ESI Study Package 3 (5,15)

Study Package (6+ 10) HV Equipments

24-ESI Study Package 33 (6)

Study Package (7) Drawing

4-ESI Study Package 4 (7) + 11 (21)

Study Package (8) Insulation

7-ESI Study Package 8 (12)

6-ESI Study Package 7 (4,8,11,13)

Study Package (9) Protection

26-ESI Study Package 5 (9)

8-ESI Study Package 9 (16)

Study Package (10) HV Equipments

Study Package (12) Harmonics

7-ESI Study Package 8 (12)

Study Package (13) Voltage Regulation

11-ESI Study Package 13 (23)

6-ESI Study Package 7 (4,8,11,13)

Study Package (15) Electrical Estimating

3-ESI Study Package 3 (5,15)

Study Package (16+17)-OHS

8-ESI Study Package 9 (16)

Study Package (19) Generator

15-ESI Study Package 19 (3132)

Study Package (20) Transmission System

Study Package (21+34)-Electrical Distribution

4-ESI Study Package 4 (7) + 11 (21)

Study Package (22) Generator

18-ESI Study Package 22 (35)

Study Package (23) Machine Rating

19-ESI Study Package 23 (36)

11-ESI Study Package 13 (23)

Study Package (24) Signal Communication

20-ESI Study Package 24 (38)

Study Package (25+27+31+32) Installation & Testing

Study Package (24) Modern Power System

Study Package (25+27+31+32) Installation & Testing

15-ESI Study Package 19 (3132)

21-ESI Study Package 26 (2)

21-ESI Study Package 26 (41)

Study Package (27) Relay

Study Package (28) Power Accessories

Study Package (34) Power Equipments Commissioning

Study Package (34) Equipments Commissioning

18-ESI Study Package 22 (35)

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

· enterprise-specific procedures and work practices relating to managing network demand encompassing:

· Commonwealth/state/territory and local government legislation, supply authority regulations, standards, codes and/or enterprise requirements applicable to the procedures and work practices relating to managing network demand

· requirements for the use of demand management manuals, system diagrams/plans and drawings

· https://www.evoenergy.com.au/emerging-technology/demand-management

www.iqytechnicalcollege.com/Demand management - Evoenergy.pdf

· identifying and interpreting enterprise demand management procedures

· https://www.netsuite.com/portal/resource/articles/inventory-management/demand-management.shtml

http://www.iqytechnicalcollege.com/What is Demand Management_ Functions, Process and Examples _ NetSuite.pdf

· techniques in applying enterprise demand management procedures

· effective management and communication encompassing:

· https://www.erp-information.com/demand-management.html

www.iqytechnicalcollege.com/What is Demand Management.pdf

· Commonwealth/state/territory and local government legislation, standards, codes, supply authority regulations and/or enterprise requirements applicable to assisting in effective management and communication

· enterprise operational principles - workplace WHS/OHS enterprise plan, environmental enterprise policies and procedures, industrial relations policies and procedures, and anti-discrimination policies and procedures

· relationship between the management and employees - methods used to collate and distribute/disseminate information, responsibilities of each member of the work team, staff development activities and legislation requirements with regard to WHS/OHS training, methods of addressing barriers such as literacy and cultural differences, and provisions relating to WHS/OHS issue resolution

· https://www.pdfdrive.com/the-relationship-of-employee-engagement-and-employee-job-satisfaction-to-organizational-d76661866.html

http://www.iqytechnicalcollege.com/The Relationship of Employee Engagement and Employee Job Satisfac.pdf

· techniques associated with organisational policies and procedures related to human resources - relevant awards and certified agreements, legislation impacting on people management, range of support services and expertise available

· https://www.pdfdrive.com/organizational-strategy-structure-and-process-stanford-business-classics-e156806952.html

http://www.iqytechnicalcollege.com/Organizational StrategyStructure, and Process (Stanford Business Classics) ( PDFDrive ).pdf

· techniques in managing relationships - identifying problems; methods of conflict resolution; methods of consultation, communication, negotiation and mentoring; and strategies for positive feedback

· https://www.pdfdrive.com/customer-relationship-management-customer-relationship-management-e38359745.html

http://www.iqytechnicalcollege.com/CUSTOMER RELATIONSHIP MANAGEMENT Customer Relationship Management ( PDFDrive ).pdf

· techniques in leadership in achieving enterprise strategic and operational plans

· https://www.pdfdrive.com/leadership-management-e33599985.html

http://www.iqytechnicalcollege.com/2Dr Rebecca Jones Nursing Leadership and Manage.pdf

· techniques in managing relationships under stress - stress management

· methodology used in writing enterprise-specific management reports encompassing:

· https://www.pdfdrive.com/stress-management-e42754115.html

www.iqytechnicalcollege.com/003-3-Stress_Management_Extra_Webpages.pdf

· Commonwealth/state/territory and local government legislation, supply authority regulations, standards, codes and/or enterprise requirements applicable to the writing enterprise-specific management reports

· https://www.pdfdrive.com/testing-commissioning-procedure-for-electrical-installation-d8566974.html

http://www.iqytechnicalcollege.com/Testing & Commissioning Procedure for Electrical Installation. ( PDFDrive ).pdf

· techniques in researching, collating and analysing information for the report - recording, filing, retrieving systems, and storing and retrieving data from computer systems

· https://www.pdfdrive.com/research-methodology-tools-and-techniques-e17306960.html

www.iqytechnicalcollege.com/9.pdf

· relationship of management reports to enterprise policies and procedures - enterprise structure and resources, workplace WHS/OHS and risk management enterprise data, financial and operational data, environmental enterprise policies and procedures, industrial relations policies and procedures, and anti-discrimination policies and procedures

· techniques in writing enterprise-specific management reports - methods used to disseminate information and facilitate enterprise requirements, document proformas, and compliance and legislative requirements to produce effective reports in the appropriate format.

http://ghill.customer.netspace.net.au/reporting/

http://www.iqytechnicalcollege.com/Enterprise Reporting Guide.pdf

UETDRDS001 Design customer power system substations (140)

G037+38_39)

G037+G038+G039 Part 1/2/3+IS69

Page 232 to 270

www.highlightcomputer.com/Video Lessons.pdf

Power System (2)

G037+G038+G039 Lesson 1-Power Flow.zip

http://youtu.be/mzwGGXRTtvw

G037+G038+G039 Lesson 2-Site Earthing.zip

http://youtu.be/PATkXVBF9kc

http://youtu.be/H4Dj1K238BE

G037+G038+G039 Lesson 3-Power System Control Equipments.zip

http://youtu.be/JJczbYVWOoI

G037+G038+G039 Lesson 4-Auxiliary System+Harmonic.zip

http://youtu.be/5mDNHGFLA0c

G037+G038+G039 Lesson 5-Harmonic.zip

http://youtu.be/n41q4Rmz2p0

http://youtu.be/8CelGV5AElk

G037+G038+G039 Lesson 6-Harmonic Calculation.zip

http://youtu.be/NHSzu6HkOgI

http://youtu.be/fSLrPIC6Mho

G037+G038+G039 Lesson 7-Synchronous Generator Loading.zip

:http://youtu.be/jv1q7Mtg7Gs

G037+G038+G039 Lesson 8-Turbine Control+Power Line Earthing.zip

http://youtu.be/0CvgkmDE3Kw

G037+G038+G039 Lesson 9-Insulator.zip

http://youtu.be/l4jqs8MLBFA

http://youtu.be/TiQezIA9Z-c

G037+G038+G039 Lesson 10-Reliability of Power System.zip

http://youtu.be/tIUk3nc1IxE

G037+G038+G039 Lesson 11-Harmonic Reduction.zip

http://youtu.be/8dYX-11kRcc

http://youtu.be/A684Agej8-w

G037+G038+G039 Lesson 12-Grounding + Power Quality.zip

http://youtu.be/QQPUj3WXJnA

G037+G038+G039 Lesson 13-Power Quality.zip

http://youtu.be/feI7SCb_QTY

http://youtu.be/mcK2YhDsnr0

G037+G038+G039 Lesson 14-Harmonic Model.zip

http://youtu.be/dwWBOq-BsLY

G037+G038+G039 Lesson 15-Harmonic Losses in Transformer.zip

http://youtu.be/mwEJgEEgPVc

http://youtu.be/1A6FY5f5ijM

http://youtu.be/yLiOKy7uJj0

G037+G038+G039 Lesson 16-Reliability Improvement.zip

http://youtu.be/cn-CfDWnUN8

G037+G038+G039 Lesson 17-Preparation for emergency.zip

http://youtu.be/La7Xip8GI2I

G037+G038+G039 Lesson 18-Harmonic problems.zip

http://youtu.be/0Urnkee_

http://youtu.be/zM_Xcwckicw

G037+G038+G039 Lesson 19-Synchronous machine problems.zip

http://youtu.be/Lx2S-NATr20

G037+G038+G039 Lesson 20-Power Generation + Generator Control.zip

http://youtu.be/56Ks8sArQxc

G037+G038+G039 Lesson 21-Turbine Control+ Digital Excitation.zip

http://youtu.be/uCsvv18qKwQ

http://youtu.be/I4vCDI2CZS0

G037+G038+G039 Lesson 22-Power System Protection.zip

http://youtu.be/c6iXRwfCYBU

G037+G038+G039 Lesson 23-Switch Gear.zip

http://youtu.be/DDpbzgNYTiM

http://youtu.be/2cl-nOdBNro

The links contain the following lessons

G037+G038+G039 Lesson 1-Power Flow

G037+G038+G039 Lesson 2-Site Earthing

G037+G038+G039 Lesson 3-Power System Control Equipments

G037+G038+G039 Lesson 4-Auxiliary System+ Harmonic

G037+G038+G039 Lesson 5-Harmonic

G037+G038+G039 Lesson 6-Harmonic Calculation

G037+G038+G039 Lesson 7-Synchronous Generator Loading

G037+G038+G039 Lesson 8-Turbine Control+ Power Line Earthing

G037+G038+G039 Lesson 9-Insulator

G037+G038+G039 Lesson 10-Reliability of Power System

G037+G038+G039 Lesson 11-Harmonic Reduction

G037+G038+G039 Lesson 12-Grounding + Power Quality

G037+G038+G039 Lesson 13-Power Quality

G037+G038+G039 Lesson 14-Harmonic Model

G037+G038+G039 Lesson 15-Harmonic Losses in Transformer

G037+G038+G039 Lesson 16-Reliability Improvement

G037+G038+G039 Lesson 17-Preparation for emergency

G037+G038+G039 Lesson 18-Harmonic problems

G037+G038+G039 Lesson 19-Synchronous machine problems

G037+G038+G039 Lesson 20-Power Generation + Generator Control

G037+G038+G039 Lesson 21-Turbine Control+ Digital Excitation

G037+G038+G039 Lesson 22-Power System Protection

G037+G038+G039 Lesson 23-Switch Gear

A010.zip

www.highlightcomputer.com/A010Mod.zip

Power system 2-G037+G038+G039.zip

Power System 2 G037+G038+G039

UETDRDS013 Organise and implement ESI line and easement surveys

https://linedesigntechnology.com/overhead-line-survey/

http://www.iqytechnicalcollege.com/Overhead Line Survey › Line Design Technology.pdf

https://www.ajol.info/index.php/mjst/article/view/185781/175083

http://www.iqytechnicalcollege.com/185781-Article Text-472343-1-10-20190418 (1).pdf

https://www.mdpi.com/2072-4292/13/8/1571/pdf

http://www.iqytechnicalcollege.com/remotesensing-13-01571-v2 (2).pdf

https://www.researchgate.net/publication/303557327_Remote_sensing_methods_for_power_line_corridor_surveys

www.iqyrechnicalcollege.com/Matikainenetal-Remotesensingmethodsforpowerlinecorridorsurveys.pdf

UETDRDS014 Prepare and manage detailed construction plans for electrical power system infrastructure

https://www.pdfdrive.com/planning-of-electric-power-distribution-e33404975.html

http://www.iqytechnicalcollege.com/Planning of Electric Power Distribution ( PDFDrive ).pdf

https://www.pdfdrive.com/electric-power-system-planning-d39893329.html

http://www.iqytechnicalcollege.com/Planning of Electric Power Distribution ( PDFDrive ).pdf

Elements and Performance Criteria

ELEMENTS		PERFORMANCE CRITERIA
Elements describe the essential outcomes.		Performance criteria describe the performance needed to demonstrate achievement of the element.
1	Plan for and coordinate the design of customer substations	1.1	Work health and safety (WHS)/occupational health and safety (OHS) practices/procedures and environmental and sustainable energy procedures, which may influence the design of customer substations, are reviewed and determined
		1.2	Purpose of the design is established and expected outcomes of the work are confirmed with appropriate personnel What is the purpose of the substation? The purpose of a substation is to 'step down' high voltage electricity from the transmission system to lower voltage electricity so it can be easily supplied to homes and businesses in the area through lower voltage distribution lines.
		1.3	Organisational established procedures on policies and specifications for the design are obtained or established with appropriate personnel https://www.ausgrid.com.au/-/media/Documents/Technical-Documentation/NS/NS185.pdf www.iqytechnicalcollege.com/NS185.pdf
		1.4	Equipment/tools and personal protective equipment (PPE) are selected and coordinated based on specified requirements and established procedures https://www.substation-safety.com/latest-news/electric-substation-personal-protective-equipment-ppe/ http://www.iqytechnicalcollege.com/Electric Substation Personal Protective Equipment (PPE).pdf
		1.5	Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes, to a quality standard and in accordance with established procedures https://www.youtube.com/watch?v=4jBXUqRT62E https://www.tasnetworks.com.au/config/getattachment/d6d8c42f-1a13-41d7-b2a0-1ee01a675bb0/Substation-Civil-Design-and-Construction-Standard-pdf.pdf http://www.iqytechnicalcollege.com/Substation-Civil-Design-and-Construction-Standard-pdf.pdf
		1.6	Risk control measures are identified, prioritised and evaluated against the work schedule https://www.transgrid.com.au/media/tipplrge/work-in-substations-general.pdf www.iqytechnicalcollege.com/work-in-substations-general.pdf
		1.7	Relevant work permits are secured to coordinate the performance of work according to requirements and/or established procedures https://www.transgrid.com.au/media/dpdkojzo/access-for-work-on-high-voltage-substation-apparatus.pdf http://www.iqytechnicalcollege.com/access-for-work-on-high-voltage-substation-apparatus.pdf
		1.8	Resources, including personnel, equipment, tools and PPE, required for the job are identified, scheduled and coordinated and confirmed safe and in technical working order https://www.youtube.com/watch?v=7Q-aVBv7PWM&vl=en https://electrical-engineering-portal.com/substation-basics www.iqytechnicalcollege.com/Substation Basic.zip
		1.9	Liaison and communication issues with other/authorised personnel, authorities, clients and landowners are resolved and activities coordinated to carry out work https://www.safetyandquality.gov.au/standards/nsqhs-standards/communicating-safety-standard www.iqytechnicalcollege.com/Communicating for Safety Standard.pdf
		1.10	Site is prepared according to the work schedule and to minimise risk and damage to property, commerce and individuals in accordance with established procedures https://www.latham-australia.com/blog/safety-measures-construction-site http://www.iqytechnicalcollege.com/11 Safety Measures Every Construction Site Should Have In Place.pdf
2	Carry out and coordinate the design of customer substations	2.1	Circuit/systems modelling is used to evaluate alternative proposals in accordance with established procedures https://www.pdfdrive.com/electric-power-substations-engineering-the-electric-power-engineering-e184841266.html http://www.iqytechnicalcollege.com/Electric Power Substations Engineering - The Electric Power Engineering ( PDFDrive ).pdf
		2.2	WHS/OHS and sustainable energy principles, functionality and practices to reduce the incidence of accidents and minimise waste are incorporated into the project in accordance with requirements and/or established procedures https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4963541/ http://www.iqytechnicalcollege.com/Sustainability and prevention in occupational health and safety - PMC.pdf
		2.3	Substation design decisions are made on the basis of safety and effective outcomes according to requirements and/or established procedures https://www.electricalandcontrol.com/key-factors-to-consider-in-substation-design/ http://www.iqytechnicalcollege.com/Key Factors to Consider In Substation Design.pdf
		2.4	Mathematical models of the customer substation are used to analyse the effectiveness of the finished project in accordance with requirements and established procedures https://www.pdfdrive.com/mathematical-modeling-and-simulation-e34334406.html http://www.iqytechnicalcollege.com/Mathematical Modeling and Simulation ( PDFDrive ).pdf
		2.5	Technical advice is given to potential hazards, safety risks and control measures so that monitoring and preventative action can be undertaken and/or appropriate authorities consulted, where necessary, in accordance with requirements and established procedures https://www.energycouncil.com.au/media/15808/eafhm_guideline_30_25-03-2019_web.pdf http://www.iqytechnicalcollege.com/eafhm_guideline_30_25-03-2019_web.pdf https://www.substation-safety.com/latest-news/safety-practices-substations/ http://www.iqytechnicalcollege.com/Safety Practices in Substations.pdf
		2.6	Essential knowledge and associated skills are applied to analyse specific data and compare it with compliance specifications to ensure completion of the project within an agreed timeframe according to requirements https://core.ac.uk/download/pdf/4267982.pdf www.iqytechnicalcollege.com/4267982.pdf
		2.7	Solutions to non-routine problems are identified and actioned using acquired essential knowledge and associated skills according to requirements https://www.powerlink.com.au/sites/default/files/2018-06/Substation%20Asset%20Methodology%20Framework.pdf http://www.iqytechnicalcollege.com/Substation Asset Methodology Framework.pdf
		2.8	Quality of work is monitored against personal performance agreement and/or established organisational and professional standards https://www.ergon.com.au/__data/assets/pdf_file/0003/146838/NI000401R122-Subs-Construction-Manual.pdf www.iqytechnicalcollege.com/NI000401R122-Subs-Construction-Manual.pdf https://electrical-engineering-portal.com/download-center/books-and-guides/power-substations/electric-power-quality www.iqytechnicalcollege.com/ElectricPowerQuality.zip
3	Complete and coordinate the design of customer substations	3.1	Final inspections of the design are undertaken to ensure it complies with all requirements and includes all specifications and documentations needed to complete the design brief https://www.transgrid.com.au/media/zgogqoqg/substation-primary-design-standard.pdf www.iqytechnicalcollege.com/substation-primary-design-standard.pdf https://yarratrams.com.au/media/2507/infrastructure-network-power-substation-design-and-construction-220419.pdf http://www.iqytechnicalcollege.com/substation-primary-design-standard.pdf
		3.2	Appropriate personnel are notified of completion and reports and/or completion documents are finalised https://www.westernpower.com.au/media/3695/distribution-substation-manual-substation-arrangements-20191220.pdf www.iqytechnicalcollege.com/distribution-substation-manual-substation-arrangements-20191220.pdf
		3.3	Reports and/or completion documents are submitted to relevant personnel/organisations for approval and, where applicable, statutory or regulatory approval https://public.wsu.edu/~campbelld/engl402/reportlecture.htm http://www.iqytechnicalcollege.com/Types of Reports_ Completion Reports and Feasibility Studies.pdf https://opentextbc.ca/projectmanagement/chapter/chapter-18-project-completion-project-management/ http://www.iqytechnicalcollege.com/18. Project Completion – Project Management – 2nd Edition.pdf
		3.4	Approved copies of design documents are issued and records are updated in accordance with established procedures https://www.lawinsider.com/clause/design-development-documents-approval http://www.iqytechnicalcollege.com/Design Development Documents Approval Sample Clauses _ Law Insider.pdf