IQY
TECHNICAL COLLEGE
STC
TECHNOLOGICAL UNIVERSITY
ST
CLEMENTS UNIVERSITY MYANMAR COLLEGE
IPEM
TECHNOLOGICAL UNIVERSITY
MASTERS DEREE LEARNING SUPPORT
There are two types of Masters Programs in Engineering
1.
Master of Engineering Practice
(1) Master of Engineering Practice (240 credits,
120 credits for BE degree)
Master of Engineering Practice is for experienced engineers . It will
include the following subjects of 10 credits each
·
BAE 701 Engineering Fundamental
·
BAE 702 Engineering Management
·
BAE 703 Leadership & Human Resources Management
·
BAE 704 Risk Management & Industrial Safety
·
BAE 705 Engineering Competency Development
·
BAE 706 Engineering Report Writing
·
BAE 707 Engineering Ethics
·
BAE 708 Engineering Knowledge
Completion of the above subjects will earn Graduate Diploma in Engineering
Practice (80 credits at Masters level +120 Credits for Bachelors degree level
total 200 credits. Completion of two or more units can earn Graduate
Certificate in Engineering.
The candidate will need to do Engineering Design Project of 40 credits to
complete Master of Engineering Practice of 240 credits
The followings are study
instruction
Form 15
IQY
Master Diploma
www.highlightcomputer.com/iqymasterdiploma.pdf
BAE701
to 708, you will complete the Graduate Diploma
Then
submit the design project to complete the Masters
From
the above links, textbooks can be downloaded. Choose Civil Engineering
Form 45 St Clements University Master of Engineering for Non standard Entry
Study Support
http://www.highlightcomputer.com/Master
of Engineering.pdf
The
following link shows the example of the tasks that you need to do
Form 46 Master Diploma Civil Worked Example
http://www.iqytechnicalcollege.com/MasterDiplomaWorkExamplesCivil.pdf
The
following link contains the Masters Course References.
Form 18
Master
Diploma resources
www.highlightcomputer.com/masterdiplomaresources.htm
·
BAE 705 Engineering Competency Development
· BAE705 – Engineering
Competency Development
· Assessment Types and Methods
(100%
coursework)
· Option A
– Research Proposal (RP)@ (at
postgraduate standard) for Engineering Professionals in Academic Field
·
· Option B
– Feasibility Study on an Approved
Engineering Project for Engineering Professionals in Practice.
· @
Suggested Format of Research Proposal (RP):
|
Research
Proposal (Max: 50 pages) |
|
|
1 |
Introduction to Research/Project Title |
|
2 |
Research Goal: Aim; Objectives; Key Questions |
|
3 |
Problem Statement |
|
4 |
Importance of the Study (Rational of study |
|
5 |
Initial literature review |
|
6 |
Proposed research methodology |
|
7 |
Proposed contents for each chapter |
|
8 |
Initial reference |
|
9 |
Work plan or schedule of works |
· Report (60%
weightage) Plus Oral Presentation
(40% weightage)
|
Oral
Presentation/Viva: Assessment Criteria (within 45 minutes: 30 minutes for
presentation + 14 minutes for Q&A) |
Percentage
(%) |
|
|
1 |
Overview : Title stated and defined |
4 |
|
2 |
Body: Scope; Objectives; Proposed research
methodology; likely outcomes; Work plan; Possible funding. |
8 |
|
3 |
Technique: Good diction; Gestures; Visual aids;
Logical flow of presentation |
8 |
|
4 |
Questions & Answers: positive and confident;
clear and logical; provide data/evidence to support the answer (15 minutes) |
16 |
|
5 |
Summary |
4 |
|
Total |
40 |
|
Recommended
Reading Materials
UK-SPEC
https://www.engc.org.uk/ukspec.aspx
https://www.aerosociety.com/media/3836/uk-spec-third-edition.pdf
https://www.aerosociety.com/media/3846/step-by-step-guide-to-registration.pdf
Engineers Australia:
Stage 1- Competency Standards
https://www.engineersaustralia.org.au/Chartered
https://www.engineersaustralia.org.au/sites/default/files/2019-11/Stage1_Competency_Standards.pdf
https://www.engineersaustralia.org.au/sites/default/files/Stage%201%20Guide_November%202019.pdf
USA- NCEES
https://ncees.org/exams/examinee-guide/
UK-ICE
https://www.ice.org.uk/membership
https://www.ice.org.uk/my-ice/routes-to-ice-membership
https://www.ice.org.uk/my-ice/my-membership/member-assessment
https://www.ice.org.uk/my-ice/membership-documents/ipd-online-guidance
https://thecivilengineeringexam.com/ice-attributes-introduction/
UK-IStructE
https://www.istructe.org/membership/chartered-membership/
https://www.istructe.org/training-and-development/ipd/
https://www.istructe.org/training-and-development/membership-exams/
https://www.istructe.org/training-and-development/membership-exams/professional-review-interview/
PEB-Singapore
https://www.peb.gov.sg/pe_registration_intro.aspx
https://www.peb.gov.sg/pereg_fee.aspx
https://www.peb.gov.sg/pereg_ppe.aspx
www.iqytechnicalcollege.com/SNIF.zip
Society of Professional Engineers
International
http://www.thespeukinternational.org/membershipinformation.htm
http://www.thespeukinternational.org/internationalapplication.htm
http://www.thespeukinternational.org/Code%20of%20Professional%20Conduct.htm
BAE706 – Engineering Report
http://www.mongroupsydney1.com/Report.pdf
http://www.iqytechnicalcollege.com/E024.ppt
· BAE 707 Engineering Ethics
(Prepared
by Dr Sam Man Keong)
www.iqytechnicalcollege.com/BAE707-Engineering
Ethics- SAmMK-2020.pptx
·
BAE 708 Engineering Knowledge
Civil
Engineering
BAE708 – Engineering Knowledge
[Special
Routes to FSIET: Thesis/Report; Project]
Assessment
Types and Methods
(100%
coursework)
Option A – Research
Thesis/Report (RT)@ (at postgraduate standard) for Engineering
Professionals in Academic Field
Option B – Design
on an Approved Engineering Project for Engineering Professionals in Practice.
@ Suggested
Format of Research Thesis (RT):
|
Research Thesis (Max: 200
pages; excluding appendices) |
|
|
1 |
Title
Page |
|
2 |
Acknowledgement |
|
3 |
Declaration |
|
4 |
Abstract |
|
5 |
Content
Page |
|
6 |
List
of illustrations |
|
7 |
List
of photographic plates, if any |
|
8 |
Body
(actual report) Chapter
1 – Introduction Chapter
2 – Literature Review Chapter
3 – Proposed Research Methodology Chapter
4 – Findings and Discussion Chapter
5 – Conclusions and Recommendations |
|
9 |
List
of References |
|
10 |
Appendices |
Report
(60%
weightage) Plus Oral Presentation
(40% weightage)
|
Oral Presentation/Viva: Assessment
Criteria (within 45 minutes: 30 minutes for presentation + 15 minutes for
Q&A) |
Percentage (%) |
|
|
1 |
Overview
: Title stated and defined |
4 |
|
2 |
Body:
Scope; Objectives; methodology; findings; conclusions |
8 |
|
3 |
Technique:
Good diction; Gestures; Visual aids; Logical flow of presentation |
8 |
|
4 |
Questions
& Answers: positive and confident; clear and logical; provide
data/evidence to support the answer (15 minutes) |
16 |
|
5 |
Summary |
4 |
|
Total |
40 |
|
Civil
Engineering recommended readings
http://www.iqytechnicalcollege.com/BAE708-Engineering
Knowledge - SamMK-26 May 2020.pdf
Electrical
Engineering recommended readings
http://www.highlightcomputer.com/MasterofEngineeringElectricalCourseWorkGraduateDiplomaSyllabus.pdf
(1) Master of Engineering (Professional
Engineering)
(240 credits,
120 credits for BE degree)
Masters
of Engineering (Professional Engineering) program is for recent graduates who
have completed their BE degrees.
It will include the following 24 subjects of 5 credits each
The students will have to write
20 pages study progress report for each of the subjects outlined below.
The report needs to include
·
Date and chapters
that the candidate reads (The student will need to read the book
·
at least 4 days
per week)
·
Highlight the key concepts, key formula, key theory
& practical application concepts .
·
Notes of the
topic that you read.
·
Key diagrams,
formula, problem solutions
·
Power point
slides to express the key topics
There are 24 units in Masters of
Engineering (Professional Engineering) Program, the candidate will need to
complete one unit per month so that the whole program will be completed within
24 months. (120 credits at Masters level and 120 Credits for Bachelors degree
total 240 credits).
As Master of Professional
Engineering in delivered entirely in English and very intensive program, to
encourage the students to earn the Graduate Diploma and Masters degree, the
following arrangements are also made.
Graduate Diploma in Engineering (140 credits)
Completion of the compulsory 4 subjects will earn Graduate Diploma in
Engineering (20 credits at Masters level
+120 Credits for Bachelors degree level total 140 credits. Completion of two or
more units can earn Graduate Certificate in Engineering.
Master of Engineering Science
Completion of the compulsory 6 subjects will earn Master of Engineering
Science (30 credits at Masters level
+120 Credits for Bachelors degree level total 150 credits.
Master of Engineering
Completion of the compulsory 6 subjects PLUS project (30 credits) will earn
Master of Engineering (60 credits at
Masters level +120 Credits for Bachelors degree level total 180 credits.
Project Reference Link
http://www.iqytechnicalcollege.com/engineeringdesign.htm
Master of Engineering from SCPU School of Engineering registered in
Switzerland
Please note that the candidates who want to get the Master of Engineering
from SCPU School of Engineering registered in Switzerland must complete Masters of Engineering (Professional
Engineering) by either studying the lectures of entire English medium of
language instruction or self
study in provided textbooks written in English which they need to do self study
and submit the study report.
Electrical Compulsory
Subjects
·
BAE
655-Wireless Communications
·
BAE656
Advanced Digital Signal Processing
·
BAE
670-Power System Engineering
·
BAE
661-Design of Electrical Services for Buildings
·
BAE
677-Photovoltaic Systems
·
BAE
660-Control Engineering
Two cross disciplinary subjects
·
BAE 694-Mechanical
Control Engineering
·
BAE 699-Rotating
Machinery Vibration
Lecture Notes (Click the Subject)
View the video below and prepare the assignment.
·
BAE 655-Wireless Communications
Notes
http://www.iqytechnicalcollege.com/BAE%20655-Wireless%20Communications%20Notes.pdf
Video
Textbook -www.iqytechnicalcollege.com/ElectricalMaster.zip
Pick
up the required book
·
BAE656 Advanced Digital Signal Processing
Notes
http://www.iqytechnicalcollege.com/BAE656%20Advanced%20Digital%20Signal%20Processing.pdf
Video
Textbook -www.iqytechnicalcollege.com/ElectricalMaster.zip
Pick
up the required book
·
BAE 670-Power System Engineering
Notes
http://www.iqytechnicalcollege.com/BAE670%20Power%20System%20Engg.pdf
Video
Textbook -www.iqytechnicalcollege.com/ElectricalMaster.zip
Pick
up the required book
·
BAE 661-Design of Electrical Services for Buildings
Notes
http://www.iqytechnicalcollege.com/BAE661BuildingElectricalService.pdf
Video
Textbook -www.iqytechnicalcollege.com/ElectricalMaster.zip
Pick
up the required book
·
BAE 677-Photovoltaic Systems
Notes
http://www.iqytechnicalcollege.com/BAE677%20Photovoltaics%20System.pdf
Video
Textbook -www.iqytechnicalcollege.com/ElectricalMaster.zip
Pick
up the required book
Notes
http://www.iqytechnicalcollege.com/BAE660%20Control%20Engineering.pdf
Video
Textbook -www.iqytechnicalcollege.com/ElectricalMaster.zip
Pick
up the required book
Two
Cross disciplinary subjects
BAE 694-Electro-Mechanical Control Engineering
Notes
http://www.iqytechnicalcollege.com/BAE694%20Control%20Engineering.pdf
Video
Textbook www.iqytechnicalcollege.com/MechanicalMaster.zip
Pick
up the required book
BAE 699-Rotating Machinery Vibration
Notes
http://www.iqytechnicalcollege.com/BAE%20699-Rotating%20Machinery%20Vibration1.pdf
Video
Textbook www.iqytechnicalcollege.com/MechanicalMaster.zip
Pick
up the required book
The above subjects will be provide with English and Myanmar Instructions
and guidance. The candidates can choose the other subjects from the available
subjects but they are entire English medium of instruction or self study in
provided textbooks written in English which they need to do self study and
submit the study report.
Instead of doing the project, the following options are also open for the
students.
Project Reference Link http://www.iqytechnicalcollege.com/engineeringdesign.htm
Option (1) Self study or two more subjects
The students can select choose two
more subjects from the available subjects in same discipline or other
discipline , follow the entire English medium of instruction or self study in
provided textbooks written in English which they need to do self study and
submit the study report.
Option (2) Complete any two of the following subjects by submitting the
assignments
·
BAE 702 Engineering Management
·
BAE 703 Leadership & Human Resources Management
·
BAE 704 Risk Management & Industrial Safety
·
BAE 707 Engineering Ethics
The link to those subjects, Click HERE
Civil Compulsory Subjects
BAE 631-Advanced Concrete Technology
BAE 634-Building Construction
BAE 636-Building Technology Electrical Mechanical System
(BAE661-Design of Electrical Services for Buildings)
BAE 650-Steel Design
BAE 635-Building Survey
BAE 644-Estimating
Two
Cross disciplinary subjects
BAE 689A/B-Mechanical Design
Lecture Notes (Click the Subject)
View the video below and prepare the assignment.
BAE 631-Advanced Concrete Technology
Notes
http://www.iqytechnicalcollege.com/BAE%20631-Advanced%20Concrete%20Technology1.pdf
Video
www.iqytechnicalcollege.com/CivilMaster.zip
Pick
up the required book
Notes
http://www.iqytechnicalcollege.com/BAE634%20Building%20Construction.pdf
Video
www.iqytechnicalcollege.com/CivilMaster.zip
Pick
up the required book
Notes
http://www.iqytechnicalcollege.com/BAE661BuildingElectricalService.pdf
Video
www.iqytechnicalcollege.com/CivilMaster.zip
www.iqytechnicalcollege.com/ElectricalMaster.zip
Pick
up the required book
Notes
http://www.iqytechnicalcollege.com/BAE650SteelDesign.pdf
Video
www.iqytechnicalcollege.com/CivilMaster.zip
Pick
up the required book
Notes
http://www.iqytechnicalcollege.com/BAE635%20Building%20Survey.pdf
Video
www.iqytechnicalcollege.com/CivilMaster.zip
Pick
up the required book
Notes
http://www.iqytechnicalcollege.com/BAE644%20Estimating.pdf
Video
www.iqytechnicalcollege.com/CivilMaster.zip
Pick
up the required book
Two
Cross disciplinary subjects
Notes
http://www.iqytechnicalcollege.com/BAE644%20Mechanical%20Estimating.pdf
Video
Textbook www.iqytechnicalcollege.com/MechanicalMaster.zip
Pick
up the required book
Notes
http://www.iqytechnicalcollege.com/BAE689MechanicalDesign.pdf
Video
Textbook -www.iqytechnicalcollege.com/MechanicalMaster.zip
Pick
up the required book
The above subjects will be provide with English and Myanmar Instructions
and guidance. The candidates can choose the other subjects from the available
subjects but they are entire English medium of instruction or self study in
provided textbooks written in English which they need to do self study and
submit the study report.
Instead of doing the project, the students
can select choose two more subjects from the available subjects in same
discipline or other discipline , follow the entire English medium of
instruction or self study in provided textbooks written in English which they
need to do self study and submit the study report.
Project Reference Link http://www.iqytechnicalcollege.com/engineeringdesign.htm
Mechanical Compulsory
Subjects
BAE 678A/B-Machine Design
BAE 689A/B-Mechanical Design
BAE 698-Thermal Engineering
BAE 694-Control Engineering
BAE 699-Rotating Machinery Vibration
BAE 690-Mechanical Estimating
Two
Cross disciplinary subjects
BAE 661-Design of
Electrical Services for Buildings
Lecture Notes (Click the Subject)
View the video below and prepare the assignment.
Notes
http://www.iqytechnicalcollege.com/BBAE678B%20Machine%20Design.pdf
Video
Textbook -www.iqytechnicalcollege.com/MechanicalMaster.zip
Notes
http://www.iqytechnicalcollege.com/BAE689MechanicalDesign.pdf
Video
Textbook -www.iqytechnicalcollege.com/MechanicalMaster.zip
Notes
http://www.iqytechnicalcollege.com/BAE698%20Thermal%20Engineering.pdf
Video
Textbook -www.iqytechnicalcollege.com/MechanicalMaster.zip
Notes
http://www.iqytechnicalcollege.com/BAE694%20Control%20Engineering.pdf
Video
Textbook -www.iqytechnicalcollege.com/MechanicalMaster.zip
BAE 699-Rotating Machinery Vibration
Notes
http://www.iqytechnicalcollege.com/BAE%20699-Rotating%20Machinery%20Vibration1.pdf
Video
Textbook -www.iqytechnicalcollege.com/MechanicalMaster.zip
Notes
http://www.iqytechnicalcollege.com/BAE644%20Mechanical%20Estimating.pdf
Video
www.iqytechnicalcollege.com/MechanicalMaster.zip
Two
Cross disciplinary subjects
BAE 661-Design of Electrical Services for Buildings
Notes
http://www.iqytechnicalcollege.com/BAE661BuildingElectricalService.pdf
Video
Textbook -www.iqytechnicalcollege.com/ElectricalMaster.zip
Pick
up the required book
Notes
http://www.iqytechnicalcollege.com/BAE650SteelDesign.pdf
Video
Textbook -www.iqytechnicalcollege.com/CivilMaster.zip
Pick
up the required book
The above subjects will be provide with English and Myanmar Instructions
and guidance. The candidates can choose the other subjects from the available
subjects but they are entire English medium of instruction or self study in
provided textbooks written in English which they need to do self study and
submit the study report.
Instead of doing the project, the students
can select choose two more subjects from the available subjects in same
discipline or other discipline , follow the entire English medium of
instruction or self study in provided textbooks written in English which they
need to do self study and submit the study report.
Project Reference Link http://www.iqytechnicalcollege.com/engineeringdesign.htm
List of the subjects and Resources Download Link
www.iqytechnicalcollege.com/ElectricalMaster.zip
The above
link contains all textbooks in the following links
Part 1 Course Work
Any 24
subjects can be selected .
(1) BAE 658-Real-time Systems
(2) BAE 665-Fabrication Engineering at the
Micro and Nanoscale
(3) BAE 655-Wireless Communications.
(3) BAE 671-Satellite Communications and
Navigation Systems
(4) BAE 665-Embedded Digital Signal
Processing Systems
(5)BAE 657-Advanced Electromagnetics Applications
http://www.filefactory.com/file/1mbgasgnxy93/n/BAE_657-Advanced_Electromagnetics_Applications.pdf
(6)BAE 676-Failure Analysis
http://www.filefactory.com/file/1w9zhndc8b5z/n/BAE_676-Failure_Analysis.pdf
(7)BAE 673-Frequency Stability
http://www.filefactory.com/file/21w10baryybn/n/BAE_673-Frequency_Stability.pdf
(8) MEE11-High Speed A-D Converters
http://www.filefactory.com/file/247r7pmlmax1/n/MEE11-High_Speed_A-D_Converters.pdf
(9) MEE2-Advanced Electric Power Engineering
http://www.filefactory.com/file/28s2jl9s6jp9/n/MEE2-Electric_Power_Engineering_Handbook.pdf
MEE9-Handbook of Power System Engineering-.pdf
(11.57MB)
http://www.filefactory.com/file/5iwg1c80l4ch/n/MEE9-Handbook_of_Power_System_Engineering-.pdf
(10)MEE12-Iterative Learning Control
http://www.filefactory.com/file/2t8i8n68gfzd/n/MEE12-Iterative_Learning_Control.pdf
(11) BAE 664-Distributed Generation in Power
System
http://www.filefactory.com/file/2tka2s19woqn/n/BAE_664-Distributed_Generation_in_Power_System.pdf
(12) BAE 675-Nanoelectronics
http://www.filefactory.com/file/2wtd6zza78l3/n/BAE_675-Nanoelectronics.pdf
(13) MEE1-Electric Distribution Systems
http://www.filefactory.com/file/2yopzfby93pj/n/MEE1-Electric_Distribution_Systems.pdf
(14) BAE 674-Intelligent Systems
http://www.filefactory.com/file/321mufhgyzh9/n/BAE_674-Intelligent_Systems.pdf
(15) MEE13-Non linear control
http://www.filefactory.com/file/3d8kc8qhba7b/n/MEE13-Non_linear_control.pdf
(16) BAE 656-Advanced Digital Signal
Processing and Noise Reduction
http://www.filefactory.com/file/421kodg30jn1/n/BAE_656-Advanced_Digital_Signal_Processing_and_Noise_Reduction.pdf
(17) BAE 677-Photovoltaic Systems
http://www.filefactory.com/file/42jfig03yv4f/n/BAE_677-Photovoltaic_Systems.pdf
(18) BAE 660-Control Engineering
http://www.filefactory.com/file/46twhbgp2wc5/n/BAE_660-Control_Engineering.pdf
(19) BAE 659-Computer-aided Control Systems
http://www.filefactory.com/file/48fm13vmikbb/n/BAE_659-Computer-aided_Control_Systems.pdf
(20) MEE7-EMI Filter Design
http://www.filefactory.com/file/4b162hfgkxul/n/MEE7-EMI_Filter_Design.pdf
(21) BAE 661-Design of Electrical Services
for Buildings
http://www.filefactory.com/file/4caqg74ekjhr/n/BAE_661-Design_of_Electrical_Services_for_Buildings.pdf
(22) BAE 670-Power System Engineering
http://www.filefactory.com/file/4ykq7inoatzl/n/BAE_670-Power_System_Engineering.pdf
(23) MEE10-High Performance Control of AC
Drives
http://www.filefactory.com/file/5exyyijdmosr/n/MEE10-High_Performance_Control_of_AC_Drives_with_Matlab_-Simulink_Models.pdf
(24) BAE 667-Industrial Control System
http://www.filefactory.com/file/5ijwrfyys5jp/n/BAE_667-Industrial_Control_System.pdf
(25) MEE14-System Engineering Concepts
http://www.filefactory.com/file/5jtmzq5fg7lb/n/MEE14-System_Engineering_Concepts.pdf
(26) MEE6-Electronics+Power Electronics+Opto
Electronics+Microwave+Radar
http://www.filefactory.com/file/5wziqec6cb0p/n/MEE6-Electronics+Power_Electronics+Opto_Electronics+Microwave+Radar.pdf
(27) BAE 666-Generating Electricity in a Carbon
Constrained World
http://www.filefactory.com/file/6fu489jg96aj/n/BAE_666-Generating_Electricity_in_a_Carbon_Constrained_World.pdf
(28) BAE 669-Power Electronics and
Instrumentation Engineering
http://www.filefactory.com/file/6jqfec5la1ll/n/BAE_669-Power_Electronics_and_Instrumentation_Engineering.pdf
(29) BAE 663-Advanced Digital Electronics
http://www.filefactory.com/file/6m5ut9or9mk3/n/BAE_663-Digital_Electronics.pdf
(30)MEE8-Flexible Power Transmission
http://www.filefactory.com/file/6s9rxyodlvn7/n/MEE8-Flexible_Power_Transmission.pdf
(31) BAE 668-Photonics
http://www.filefactory.com/file/6yroloxwwikp/n/BAE_668-Photonics.pdf
(32) MEE3-Electric Power Transmission System
Engineering
http://www.filefactory.com/file/7dfo9gt09f9p/n/MEE3-Electric_Power_Transmission_System_Engineering.pdf
(33) BAE 672-Industrial& System Engineering
http://www.filefactory.com/file/fvex6pyyawh/n/BAE_672-Industrial_&_System_Engineering.pdf
(34) MEE5-Electro Optics
http://www.filefactory.com/file/jqeo0hb6y5/n/MEE5-Electro_Optics.pdf
(35) MEE4-Electricity Power Generation
http://www.filefactory.com/file/nwwo73w8tkb/n/MEE4-Electricity_Power_Generation.pdf
(36) BAE 662-Design of Rotating Electrical
Machines
http://www.filefactory.com/file/t64a7qummpf/n/BAE_662-Design_of_Rotating_Electrical_Machines.pdf
Part 2 Thesis
Master of Engineering (Thesis).pdf (0.3MB)
http://www.filefactory.com/file/3af0v4k7455r/n/Master_of_Engineering_(Thesis).pdf
Other References
Master of Engineering (Electrical) Course
Work Graduate Diploma Syllabus.doc (0.02MB)
http://www.filefactory.com/file/vfkphifwrjr/n/Master_of_Engineering_(Electrical)_Course_Work_Graduate_Diploma_Syllabus.doc
Graduate Diploma in Electrical Engineering
Course Work.pdf (0.26MB)
http://www.filefactory.com/file/6cw6hfgm2g43/n/Graduate_Diploma_in_Electrical_Engineering_Course_Work.pdf
St Clements Technological University Masters
Degree Scholarship Application Form.doc (1.32MB)
http://www.filefactory.com/file/4dinvu12ggqb/n/St_Clements_Technological_University_Masters_Degree_Scholarship_Application_Form.doc
iqymasterdegree.docx (2.65MB)
http://www.filefactory.com/file/7j9onkgo6bq1/n/iqymasterdegree.docx
Graduate Diploma in Electrical Engineering
Course Work.doc (0.04MB)
http://www.filefactory.com/file/83gffx6f5p/n/Graduate_Diploma_in_Electrical_Engineering_Course_Work.doc
Educational Research.pdf (3.02MB)
http://www.filefactory.com/file/72bd89kpjzpr/n/Educational_Research.pdf
www.iqytechnicalcollege.com/CivilMaster.zip
The above
link contains all textbooks in the following links
Part 1 Course Work
All 24
subjects must be completed.
(1) BAE 654-Theory & Design of Bridges
http://www.filefactory.com/file/6cna1fxfxe5t/n/BAE_654-Theory_&_Design_of_Bridges.pdf
(2)BAE 653-Surveying
http://www.filefactory.com/file/6hick1v3lcgj/n/BAE_653-Surveying.pdf
(3) BAE 652-Structural Analysis
http://www.filefactory.com/file/594v64zty7z7/n/BAE_652-Structural_Analysis.pdf
(4) BAE 649-Soil & Rock Mechanic
http://www.filefactory.com/file/1t8jwjiaoxtt/n/BAE_649-Soil_&_Rock_Mechanic.pdf
(5)BAE 651-Strom & Waste Water
http://www.filefactory.com/file/3ymzb4mn8sw9/n/BAE_651-Strom_&_Waste_Water.pdf
(6) BAE 650-Steel Design.pdf
http://www.filefactory.com/file/78rjjbl9xcxh/n/BAE_650-Steel_Design.pdf
(7) BAE 648-Railways Bridges
http://www.filefactory.com/file/13osti7n6fbv/n/BAE_648-Railways_Bridges.pdf
(8)BAE 646 Highway Engineering
http://www.filefactory.com/file/5y4fhfwn03ux/n/BAE_646-Handbook_of_Highway_Engineering.pdf
(9) BAE 647-Piling Engineering
http://www.filefactory.com/file/6vwyc5zh8hwh/n/BAE_647-Piling_Engineering.pdf
(10) BAE 645-Geotechnics
http://www.filefactory.com/file/1qbd8kt98kfb/n/BAE_645-Geotechnics.pdf
(11) BAE 642-Design of Reinforce Concrete
http://www.filefactory.com/file/6fb9b4a5y047/n/BAE_642-Design_of_Reinforce_Concrete.pdf
(12) BAE 644-Estimating
http://www.filefactory.com/file/15saskthxenn/n/BAE_644-Estimating.pdf
(13) BAE 643-Earthquake Resistant Structure
http://www.filefactory.com/file/hf30tjgydg9/n/BAE_643-Earthquake_Resistant_Structure.pdf
(14) BAE 638-Construction Drawing
http://www.filefactory.com/file/6rb4iy0c392p/n/BAE_638-Construction_Drawing.pdf
(15)BAE 641-Construction Site Planning
http://www.filefactory.com/file/2u6hihmhdcvv/n/BAE_641-Construction_Site_Planning.pdf
(16) BAE 640-Construction Mathematics.
http://www.filefactory.com/file/2t0cdnfd0v17/n/BAE_640-Construction_Mathematics.pdf
(17) BAE 639-Construction Materials
http://www.filefactory.com/file/2xbwrhn58cq5/n/BAE_639-Construction_Materials.pdf
(18) BAE 634-Building Construction
http://www.filefactory.com/file/2aau6edz64kb/n/BAE_634-Building_Construction.pdf
(19) BAE 637-Composite Structure of Steel
& Concrete
http://www.filefactory.com/file/54hckfw6ncmx/n/BAE_637-Composite_Structure_of_Steel_&_Concrete.pdf
(20) BAE 636-Building Technology Electrical
Mechanical System
http://www.filefactory.com/file/4semnv28w4u3/n/BAE_636-Building_Technology_Electrical_Mechanical_System.pdf
(21) BAE 635-Building Survey
http://www.filefactory.com/file/3hjjqj6ixnnf/n/BAE_635-Building_Survey.pdf
(22) BAE 633-Bridge Construction
http://www.filefactory.com/file/3i1y9y08vjlx/n/BAE_633-Bridge_Construction.pdf
(23) BAE 632-Architectural Design
http://www.filefactory.com/file/sezgrl1sv7d/n/BAE_632-Architectural_Design_--.pdf
(24) BAE 631-Advanced Concrete Technology
http://www.filefactory.com/file/61bztxk40ygr/n/BAE_631-Advanced_Concrete_Technology.pdf
Part 2 Thesis
Master of Engineering (Thesis).pdf (0.3MB)
http://www.filefactory.com/file/15k1lujt4bol/n/Master_of_Engineering_(Thesis).pdf
Final Thesis.rtf (<1MB)
http://www.filefactory.com/file/2plo8s3fjjcp/n/Final_Thesis.rtf
MasterofEngineeringCivilCourseWorkGraduateDiplomaSyllabus.pdf
(0.22MB)
http://www.filefactory.com/file/5v5403v7ul8l/n/MasterofEngineeringCivilCourseWorkGraduateDiplomaSyllabus.pdf
Master of Engineering (Civil) Course Work
Graduate Diploma Syllabus.doc (0.02MB)
http://www.filefactory.com/file/39xuqmfcgmn/n/Master_of_Engineering_(Civil)_Course_Work_Graduate_Diploma_Syllabus.doc
Graduate Diploma in Civil Engineering Course
Work.pdf (0.26MB)
http://www.filefactory.com/file/j6mhq5gh4t/n/Graduate_Diploma_in_Civil_Engineering_Course_Work.pdf
Graduate Diploma in Civil Engineering Course
Work.doc (0.04MB)
http://www.filefactory.com/file/7cz9uq50zn6n/n/Graduate_Diploma_in_Civil_Engineering_Course_Work.doc
Educational Research.pdf (3.02MB)
http://www.filefactory.com/file/72bd89kpjzpr/n/Educational_Research.pdf
www.iqytechnicalcollege.com/MechanicalMaster.zip
The above
link contains all textbooks in the following links
Part 1 Course Work
Any 24
subjects to be completed.
(1) BAE 694-Control Engineering
http://www.filefactory.com/file/1dpsuknrlf9j/n/BAE_694-Control_Engineering.pdf
(2) BAE 682-Assembly Automation & Product
Design
http://www.filefactory.com/file/1qtmguvke219/n/BAE_682-Assembly_Automation_&_Product_Design.pdf
(3) BAE 688-Manufacturing & Management.
http://www.filefactory.com/file/1tcw9lun7wc3/n/BAE_688-Manufacturing_&_Management.pdf
(4) BAE 692-Metallurgy
http://www.filefactory.com/file/1upnfb8wgc71/n/BAE_692-Metallurgy.pdf
(5) BAE 689A-Mechanical Design
http://www.filefactory.com/file/255oid5jrxd7/n/BAE_689A-Mechanical_Design.pdf
(6) BAE 686-Electro-Mechanical Manufacturing
Process
http://www.filefactory.com/file/27rpcht1ozbl/n/BAE_686-Electro-Mechanical_Manufacturing_Process.pdf
(7) BAE 683-Material engineering
http://www.filefactory.com/file/2yh0aljozpnl/n/BAE_683-Material_engineering.pdf
(8) BAE 693-Piping System
http://www.filefactory.com/file/3b9qvvde0jvn/n/BAE_693-Piping_System.pdf
(9) BAE 689B-Mechanical Design
http://www.filefactory.com/file/41w2yj0cs4el/n/BAE_689B-Mechanical_Design.pdf
(10) BAE 625- Structural Engineering
Mechanics
http://www.filefactory.com/file/4jnl3mnc1j6x/n/BAE_625-_Structural_Engineering_Mechanics.pdf
(11) BAE 696-Specification Development
http://www.filefactory.com/file/4ksdzs5ofduv/n/BAE_696-Specification_Development.pdf
(12) BAE 698-Thermal Engineering
http://www.filefactory.com/file/4mwb7l5septx/n/BAE_698-Thermal_Engineering.pdf
(13) BAE 699-Rotating Machinery Vibration
http://www.filefactory.com/file/4trjzv2gxe97/n/BAE_699-Rotating_Machinery_Vibration.pdf
(14) BAE 678A-Machine Design
http://www.filefactory.com/file/4ug886bappsf/n/BAE_678A-Machine_Design.pdf
(15) BAE 684-Computerised Engine Control
http://www.filefactory.com/file/4y6ty19pr03j/n/BAE_684-Computerised_Engine_Control.pdf
(16) BAE 678B-Machine Design
http://www.filefactory.com/file/5642wwk40bhx/n/BAE_678B-Machine_Design.pdf
(17) BAE 685-Electric Vehicle Technology
http://www.filefactory.com/file/5lzoa2dt79ub/n/BAE_685-Electric_Vehicle_Technology.pdf
(18) BAE 695-Random Vibration
http://www.filefactory.com/file/6u63dc4ipuef/n/BAE_695-Random_Vibration.pdf
(19) BAE 691-Mechatronics
http://www.filefactory.com/file/6uegco6p0xxh/n/BAE_691-Mechatronics.pdf
(20) BAE 680-Quality Control
http://www.filefactory.com/file/6xftdo5d9jhd/n/BAE_680-Quality_Control.pdf
(21) BAE 690-Mechanical Estimating
http://www.filefactory.com/file/7cck28o9g6x7/n/BAE_690-Mechanical_Estimating.pdf
(22) BAE 679- Materials Science
http://www.filefactory.com/file/7ce0rpqzxmtv/n/BAE_679-_Materials_Science.pdf
(23) BAE 681- Welding Engineering.
http://www.filefactory.com/file/d4febk3tgeh/n/BAE_681-_Welding_Engineering.pdf
(24) BAE 679-Composite Materials &
Joining Thechology.pdf (15.06MB)
http://www.filefactory.com/file/dmxoy4md81h/n/BAE_679-Composite_Materials_&_Joining_Thechology.pdf
(25) BAE 687-Lasers in Manufacturing.pdf
(8.93MB)
http://www.filefactory.com/file/tgynuf7tilj/n/BAE_687-Lasers_in_Manufacturing.pdf
(26) BAE 697-Structural Foundation Design.pdf
(10.27MB)
http://www.filefactory.com/file/tuym2vrbke1/n/BAE_697-Structural_Foundation_Design.pdf
Part 2 Thesis
Master of Engineering (Thesis).pdf (0.3MB)
http://www.filefactory.com/file/3kh37hgcz3t9/n/Master_of_Engineering_(Thesis).pdf
Final Thesis.rtf (<1MB)
http://www.filefactory.com/file/w4hp8icdbkl/n/Final_Thesis.rtf
Other References
Graduate
Diploma in Mechanical Engineering Course Work.pdf (0.26MB)
http://www.filefactory.com/file/czmzgrlf9gd/n/Graduate_Diploma_in_Mechanical_Engineering_Course_Work.pdf
Graduate
Diploma in Mechanical Engineering Course Work.doc (0.04MB)
http://www.filefactory.com/file/2fwo1pzap0cp/n/Graduate_Diploma_in_Mechanical_Engineering_Course_Work.doc
Educational
Research.pdf (3.02MB)
http://www.filefactory.com/file/4imwhn5okvjb/n/Educational_Research.pdf
Master
of Engineering (Mechanical) Course Work Graduate Diploma Syllabus.doc (0.02MB)
http://www.filefactory.com/file/4mhqey2psa13/n/Master_of_Engineering_(Mechanical)_Course_Work_Graduate_Diploma_Syllabus.doc
MasterofEngineeringMechanicalCourseWorkGraduateDiplomaSyllabus.pdf
(0.22MB)
http://www.filefactory.com/file/59hf779npyyb/n/MasterofEngineeringMechanicalCourseWorkGraduateDiplomaSyllabus.pdf
iqymasterdegree.docx (2.65MB)
http://www.filefactory.com/file/5j2xgluaw2ub/n/iqymasterdegree.docx
St
Clements Technological University Masters Degree Scholarship Application
Form.doc (1.32MB)
http://www.filefactory.com/file/egbft2antvb/n/St_Clements_Technological_University_Masters_Degree_Scholarship_Application_Form.doc
www.iqytechnicalcollege.com/REMaster.zip
The above
link contains all textbooks in the following links
Part 1 Course Work
The
following 10 subjects to be completed.
Each 10
credits and total 100 credits to get Graduate Diploma
(1) RE511- Sustaining Earth Energy resources
http://www.filefactory.com/file/58p0zh18fynf/n/RE511-_Sustaining_Earth_Energy_resourcres.pdf
(2) RE510- Water Conservation
http://www.filefactory.com/file/1e7w1up4xqw1/n/RE510-_Water_Conservation.pdf
(3) RE509- Applied Photovoltaics
http://www.filefactory.com/file/6yekqohyhlsp/n/RE509-_Applied_Photovoltaics.pdf
(4) RE508- Solar Hydrogen Energy System
http://www.filefactory.com/file/69i99jqjh3v5/n/RE508-_Solar_Hydrogen_Energy_System.pdf
(5) RE507- Offshore Wind Turbines Part 1
http://www.filefactory.com/file/5ea38gn206kj/n/RE507-_Offshore_Wind_Turbines.rtf
RE507- Offshore Wind Turbines Part 2
http://www.filefactory.com/file/28hsf1kzrirx/n/RE507-_Offshore_Wind_Turbines.pdf
(6) RE505- Green Building Design
http://www.filefactory.com/file/1vkjq4pov5h3/n/RE505-_Green_Building_Design.pdf
(7) RE504- Engineering Solution for
Sustainability
http://www.filefactory.com/file/2ciix5mz90rz/n/RE504-_Engineering_Solution_for_Sustainability.pdf
(8) RE503- Energy Management in Industrial
and Commercial Facilities
http://www.filefactory.com/file/gvwe01oezo5/n/RE503-_Energy_Management_in_Industrial_and_Commercial_Facilities.pdf
(9) RE502- Biomass Gasification
http://www.filefactory.com/file/14m9r1d0iuj7/n/RE502-_Biomass_Gasification.pdf
(10) RE 501-Control of Solar Energy System
http://www.filefactory.com/file/2j636pbt8kyx/n/RE_501-Control_of_Solar_Energy_System.pdf
Part 2 Thesis
(20 credits)
Master of Engineering (Thesis).pdf (0.3MB)
http://www.filefactory.com/file/3kh37hgcz3t9/n/Master_of_Engineering_(Thesis).pdf
Final Thesis.rtf (<1MB)
http://www.filefactory.com/file/w4hp8icdbkl/n/Final_Thesis.rtf
MSc (Renewable Energy Engineering)with
password.doc (3.76MB)
http://www.filefactory.com/file/kspk8o61r1v/n/MSc_(Renewable_Energy_Engineering)with_password.doc
MSc (Renewable Energy Engineering).doc
(3.7MB)
http://www.filefactory.com/file/6rydmd46y82r/n/MSc_(Renewable_Energy_Engineering).doc
MSc
(Renewable Energy Engineering).rtf (69.27MB)
http://www.filefactory.com/file/ngt1xa9sf5h/n/MSc_(Renewable_Energy_Engineering).rtf
www.iqytechnicalcollege.com/ITMaster.zip
The above
link contains all textbooks in the following links
Part 1 Course Work
The following
8 subjects to be completed
Each 10
credits, total 80 credits to complete Graduate Diploma
(1) Programming (ICT 601).zip (125.7MB)
http://www.filefactory.com/file/1hacn281gr2r/n/7._Programming_(ICT_601).zip
(2) E-Commerce (ICT 602).zip (31.69MB)
http://www.filefactory.com/file/28duhhl00ctr/n/8._E-Commerce_(ICT_602).zip
(3) Multimedia Systems (ICT 604).zip
(55.44MB)
http://www.filefactory.com/file/2kxxcx8q5o5p/n/10._Multimedia_Systems_(ICT_604).zip
(4) Database Systems(ICT 502).zip (17.93MB)
http://www.filefactory.com/file/2v64giw319i1/n/2._Database_Systems(ICT_502).zip
(5) Applied Computing I (ICT 505).zip
(14.2MB)
http://www.filefactory.com/file/60bk4et8ceyj/n/5._Applied_Computing_I_(ICT_505).zip
(6)
Applied Computing II(ICT 506).zip (134.73MB)
http://www.filefactory.com/file/67o5hk1jyfrb/n/6._Applied_Computing_II(ICT_506).zip
(7) Software Engineering (ICT 603).zip
(90.71MB)
http://www.filefactory.com/file/7lfby06vy78h/n/9._Software_Engineering_(ICT_603).zip
The following two Electrical (Computer) subjects must be
completed
Each 5 credits. Two combined units 10 credits
(8) BAE658 Real
Time Systems + BAE 674 Intelligent Systems
BAE 658-Real-time Systems
http://www.filefactory.com/file/15rw5qapr0o9/n/BAE_658-Real-time_Systems.pdf
BAE 674-Intelligent Systems
http://www.filefactory.com/file/321mufhgyzh9/n/BAE_674-Intelligent_Systems.pdf
The above two Electrical (Computer) units can
also be downloaded from the following link
www.iqytechnicalcollege.com/ElectricalMaster.zip
Part 2 Thesis
40 credits
Research+Thesis (ICT 605).zip (3.51MB)
http://www.filefactory.com/file/66e3uch1mx7p/n/11.Research+Thesis_(ICT_605).zip
Master of Information Technology.rtf
(<1MB)
http://www.filefactory.com/file/df24gueyln9/n/Master_of_Information_Technology.rtf
Master
of Information Technology.docx (<1MB)
http://www.filefactory.com/file/4t55opuya9er/n/Master_of_Information_Technology.docx
Then Masters degree will be completed
BAE 702 Engineering
Management
See the site
http://www.highlightcomputer.com/GraduateDiplomaEngineeringPractice.htm
View the videos, down load the lessons, study and then do the exercises in
www.highlightcomputer.com/DipManagementAssignment.pdf
BAE 703 Leadership & Human
Resources Management
See the site
http://www.highlightcomputer.com/GraduateDiplomaEngineeringPractice.htm
View the videos, down load the lessons, study and then do the exercises in
Study Guide
www.highlightcomputer.com/DiplomaAdvancedDiplomaManagementStudyGuide.pdf
www.highlightcomputer.com/DipManagementAssignment.pdf
BAE 704 Risk Management & Industrial Safety
http://www.highlightcomputer.com/GraduateDiplomaEngineeringPractice.htm
View the videos, down load the lessons, study and then write an essay
“ How I will assess the risks in my workplace” You can write 3 to 5 pages.
BAE 707 Engineering Ethics
Society
of Professional Engineers-UK
http://www.professionalengineers-uk.org/index.php/the-society/code-of-professional-conduct
All
individuals registered as Professional Engineers and those aspiring to become
registered Professional Engineers shall deliver services in accordance with the
Society’s Code of Professional Conduct and shall:
1.
Competence
a) only
undertake professional tasks for which they are competent and will at all times
exercise all reasonable professional skill and care to prevent avoidable danger
to health or safety and the creation of adverse impacts on the environment.
b)
maintain and broaden their knowledge, experience and competence and encourage
others to do so.
2.
Integrity
a) treat
all persons fairly with respect and without bias
b) avoid
where possible real or perceived conflict of interest and advise affected
parties should such conflicts arise.
c)
observe the proper duties of confidentiality owed to appropriate parties.
d)
discharge their professional duties with integrity, impartiality and
objectivity and have no involvement with any form of bribery.
3.
Responsibility
a) accept
appropriate responsibility for work carried out under their supervision.
b) assess
relevant risks and liability and, if appropriate, have in force appropriate
liability insurances.
c) notify
the Society within 28 days:
d) notify
the Society of any significant violation of the Code of Conduct by any
Professional Engineer on the register or any aspiring member seeking to gain
access to the register.
4.
Information
a) co-operate with the Society and provide such
information as may be requested to facilitate any investigation into the
conduct of any Professional Engineer on the register or any aspiring member
seeking to gain access to the register.
5.
Relationships
a) have
due regard to their duty of care to clients and not take advantage of any
client or potential client for whatever cause or reason in obtaining and
carrying out instructions.
b) put
all terms of engagement in writing and state the fees to be charged; whenever
practicable, these should be issued to the client before a project is begun.
c) inform
his/her client immediately if it appears that his/her estimate as to the total
fees to be charged is likely to be or will be exceeded.
d) take
care not to mislead a client as to the range of services that a quoted fee is
intended to cover and the amount of future fees which may be involved.
Note in respect of relationships: Any Professional Engineer on the register or
any aspiring member seeking to gain access to the register shall not:
with
that client he/she makes full disclosure to the relevant client of the nature
or amount of such fee, commission, discount or inducement and the name of the
person or persons to whom such fee, commission, discount or inducement was
offered or given.
6.
Practice
a) Ensure
that in respect of any firm in which he/she is or is held out to be a sole
proprietor, partner or a director or through which he/she practises or conducts
business:
b) Titles
associated with the registration of Professional Engineers such as “PEng” and
“PEng(UK)” and membership of the Society such as “Fellow of the Society of
Professional Engineers”, “Member of the Society of Professional Engineers”, and
all others relating to membership of the Society of Professional Engineers, and
the designations FSPE, MSPE, Hon.FSPE, Hon.MSPE shall only be used or
authorised to be used in connection with a partnership or company
7.
Managerial responsibility
a) In
addition to the responsibilities referred to in the Rules of Professional
Conduct, but subject to the following, any Professional Engineer on the
register or any aspiring member seeking to gain access to the register shall be
prima facie responsible, as a matter of professional conduct, for the acts or
omissions including, in particular, breach of any of the provisions of the
Articles and Bye-Laws of the Society or these Rules of Professional Conduct of:
b) If any
Professional Engineer on the register or any aspiring member seeking to gain
access to the register is able to show that, without default on his/her part,
he/she was not aware, and there was no reason for him to be aware at the time
of any breach of these provisions by any firm or company referred to above and
he/she had, prior to the breach, taken all reasonable steps to ensure that such
a breach would not occur, then he/she shall not be in breach of this Rule.
8
Publicity and Advertising
a) Any
Professional Engineer on the register or any aspiring member seeking to gain
access to the register may publicise his/her services or permit another person
to do so, but in doing so the member must have due regard to the standards set
by the Advertising Standards Authority and any standards set by any other
regulatory or governmental authority in relation to advertising and ensure that
any publicity for which he/she is in any way responsible is neither inaccurate
nor misleading.
b) In all
advertising, publicity material or public statements for which any Professional
Engineer on the register or any aspiring member seeking to gain access to the
register is in any way responsible, he/she shall avoid all claims of
superiority over, or critical comparisons of, the services provided by other
engineers and shall avoid any direct comparison of fees and charges levied by
other engineers.
c) Any
Professional Engineer on the register or any aspiring member seeking to gain
access to the register may only refer to the name of a client in any
advertising, publicity material or public statement if the prior written
consent of that client is first obtained.
d)
Advertisements or other publicity material issued by any Professional Engineer
on the register or any aspiring member seeking to gain access to the register
or by a firm in which they are held out to be a partner or director or a
company through which they practise or conducts their business may state
(subject to compliance with any other relevant regulations or legal
requirements) either expressly or implied that they, the firm or the company
(as the case may be) offers expertise or specialist advice in relation to a
particular field of engineering provided only that this is the case.
ASSIGNMENT
From newspaper, journal, internet, online chatting groups, show one event that signify the breach of engineering ethics such as use of substandard materials, breach of safety law, breach of fair practice, attempt to monopolizing , use of law and authority for safeguarding own benefits or personal associates , depressing others and highlight how engineering ethics are breached.